Help with your ANSA DECO TX-2 Fob
Your Garolla remote fob makes operating your garage door quick and convenient. On this page, you’ll find step-by-step guidance for pairing your ANSA DECO TX-2 fob and replacing its battery, so you can keep everything running smoothly.
ANSA DECO TX-2 fob remote programming
1. Push and hold the white operating button on the wall box for 5 seconds until the red LED goes out.
2. Take the new Keyfob to be added and press the designated button once.
Repeat for all keyfobs needing coding
3. The red LED indicator on the wall box will flash with each registered keyfob
4. Once added; Wait one minute for the red LED indicator switches back to its normal state.
The door is now ready for normal use.
Replacing the battery
You’ll need:
- 1 × CR2032 battery
- Small Phillips screwdriver
Steps:
1. Remove the single screw on the back to release the casing and remove. Gently remove the circuit board and push the battery out, in a direction away from the components.
2. Swap the CR2032 battery with a new one, ensuring the '+' end faces upwards.
3. Refit the casing and screw on the back.
Follow the steps above to re-pair the remote.
Tip: If it doesn’t work, double-check the battery orientation and that the contacts are clean.
Haven't found what you're looking for?
If you can’t find an answer to your problem, our customer care team is on hand to help. Get in touch via the methods below, or click on our live chat icon...
Help Centre home > Choose your remote fob > ANSA DECO TX-2 fob